West Park Health Centre
“The largest rehabilitation hospital in Canada helps people regain their courage to face life after hopeless illnesses or accidents.”
Khaled Elshimy
– CEO
at RFID Canada
The new outpatient care center, idyllically situated on the Humber River, will replace several outdated hospital buildings on the campus.
Collaboration between RFID Canada and EllisDon
System Integrator RFID Canada
Founded by Bob Moroz in 1987, the Canadian company has been operating as a system integrator, software developer and distributor for RFID, NFC and BLE technology for almost 40 years. Kahled Elshimy has been the CEO since 2022.
Construction Company EllisDon
From the very beginning, the collaboration between RFID Canada and EllisDon, headquartered in Mississauga, Ontario, has been very cooperative. EllisDon employs 4,000 people worldwide and was founded in 1971. The company projects over five billion US dollars in construction projects annually.
Building Structure
The new construction, which began in 2020 and will be completed in 2023, consists of five wings that are all connected via a central forum. All five wings, or zones, extend over seven floors. Several departments are located within each zone.
To enable the transparent location of all assets, all zones and their sub-departments on each floor were included in the installation. The assets of the entire building can therefore be localized.
Architecture
The brass-coloured Muntz metal on the front of the building symbolizes the valuable services provided in this clinic for people with the most serious illnesses. The aim is to inspire courage to face life.
The colors of the room design are also part of the concept. In the entrance area, patients can expect a light-flooded forum with piano music, a cafeteria and small stores. The well-being of patients is an inseparable part of rehabilitation.
West Park Medical Center
- The WPMC offers rehabilitation and care after strokes, amputations and musculoskeletal disorders.
Built in 1904 as a sanatorium in the York district - New construction since 2020 with an area of 730,000 m²
- 330 beds
- Five interconnected wings
- 7 Floors
Collaboration between RFID Canada and EllisDon
System Integrator RFID Canada
Founded by Bob Moroz in 1987, the Canadian company has been operating as a system integrator, software developer and distributor for RFID, NFC and BLE technology for almost 40 years. Kahled Elshimy has been the CEO since 2022.
Construction Company EllisDon
From the very beginning, the collaboration between RFID Canada and EllisDon, headquartered in Mississauga, Ontario, has been very cooperative. EllisDon employs 4,000 people worldwide and was founded in 1971. The company projects over five billion US dollars in construction projects annually.
Building Structure
The new construction, which began in 2020 and will be completed in 2023, consists of five wings that are all connected via a central forum. All five wings, or zones, extend over seven floors. Several departments are located within each zone.
To enable the transparent location of all assets, all zones and their sub-departments on each floor were included in the installation. The assets of the entire building can therefore be localized.
Architecture
The brass-coloured Muntz metal on the front of the building symbolizes the valuable services provided in this clinic for people with the most serious illnesses. The aim is to inspire courage to face life.
The colors of the room design are also part of the concept. In the entrance area, patients can expect a light-flooded forum with piano music, a cafeteria and small stores. The well-being of patients is an inseparable part of rehabilitation.
West Park Medical Center
- The WPMC offers rehabilitation and care after strokes, amputations and musculoskeletal disorders.
Built in 1904 as a sanatorium in the York district - New construction since 2020 with an area of 730,000 m²
- 330 beds
- Five interconnected wings
- 7 Floors
The new outpatient care center, idyllically situated on the Humber River, will replace several outdated hospital buildings on the campus.
Digitized Processes
The West Park Medical Center
Asset Tracking and RTLS
Tracking devices in hospitals is part of risk and data management. It can be a matter of survival for a patient if a required device cannot be found immediately. For example, medical equipment such as endoscopes, ultrasound or dialysis machines as well as patient beds must be available in real time.
In addition, the RTLS solution enables seamless monitoring of the equipment inventory. Digital inventory data can be used for process analyses, risk assessments, investment calculations or cost accounting.
This also enables device pooling. The main aim of the system, in addition to the RTLS solution, is to record data very efficiently and synchronize it with the applications of an analysis tool.
Asset Tracking and RTLS
Tracking devices in hospitals is part of risk and data management. It can be a matter of survival for a patient if a required device cannot be found immediately. For example, medical equipment such as endoscopes, ultrasound or dialysis machines as well as patient beds must be available in real time.
In addition, the RTLS solution enables seamless monitoring of the equipment inventory. Digital inventory data can be used for process analyses, risk assessments, investment calculations or cost accounting.
This also enables device pooling. The main aim of the system, in addition to the RTLS solution, is to record data very efficiently and synchronize it with the applications of an analysis tool.
The West Park Medical Center
After two years of construction, Toronto now has one of the most modern medical facilities for rehabilitation.
Identification and Localization
With the passive UHF RFID solution installed, it is possible to identify the inventory in every area of the building – regardless of how large the area is. This allows the inventory of all assets and consumables to be monitored, controlled, located and maintained. The system also has the ability to identify and count a specific group of assets, such as wheelchairs, in a specific zone.
Precise Real-Time Localization
All assets in a room can be identified and monitored in real time. This is possible because ceiling antennas capture every movement. This makes it possible to determine how long an object has been in a room. As soon as the object leaves the room, it also disappears from the room’s monitoring system.
Maintenance and Servicing
The RFID system provides data on the inventory of a specific type of device. For example, there are 20 wheelchairs in a zone. Three of these wheelchairs need to be serviced. In a matter of seconds, the data of these three wheelchairs is transferred to a handheld with the click of a mouse.
A technician can use the handheld to very quickly filter out these three wheelchairs from the total inventory of 20 wheelchairs.
Identification and Localization
With the passive UHF RFID solution installed, it is possible to identify the inventory in every area of the building – regardless of how large the area is. This allows the inventory of all assets and consumables to be monitored, controlled, located and maintained. The system also has the ability to identify and count a specific group of assets, such as wheelchairs, in a specific zone.
Precise Real-Time Localization
All assets in a room can be identified and monitored in real time. This is possible because ceiling antennas capture every movement. This makes it possible to determine how long an object has been in a room. As soon as the object leaves the room, it also disappears from the room’s monitoring system.
Maintenance and Servicing
The RFID system provides data on the inventory of a specific type of device. For example, there are 20 wheelchairs in a zone. Three of these wheelchairs need to be serviced. In a matter of seconds, the data of these three wheelchairs is transferred to a handheld with the click of a mouse.
A technician can use the handheld to very quickly filter out these three wheelchairs from the total inventory of 20 wheelchairs.
After two years of construction, Toronto now has one of the most modern medical facilities for rehabilitation.
Location Visualization
With the new passive RFID localization solution, search times are significantly reduced.
The RFID Hub
The software can technically recognize the direction of the tags as well as a zone. Several control points in the zone enable direction recognition in real time. Specific search queries can be responded to in real time. The RFID Hub can also be integrated into third-party applications.
All inventoried assets or consumables can thus be interpreted by the third-party user for analysis purposes. The interoperability of the data and the system is an advantage for process monitoring.
RFID To Go
Mobile devices support the mobile and fast identification of specific devices. The main purpose of RFID To Go is to integrate a handheld RFID reader and offer it as a standard solution for any third-party application.
“We worked closely with the hospital team to select the right tags for the equipment and devices. We finally decided on tags from Beontag, HID and Metalcraft.”
Khaled Elshimy
– CEO
at RFID Canada
The Deployment of Tags
Some devices are even equipped with two tags – active and passive – as an active RFID solution is used for patient and employee tracking, which is also used in some cases for very large medical devices. In the first step, 25,000 devices were fitted with passive tags.
Carrier Pro from Beontag
This tag offers a larger area for visual printing. The antenna design also works reliably in the vicinity of products with a high water content. The reading range is up to 12.5 meters.
IQ 600 from HID
The HID IQ OM 600 is a small, thin, self-adhesive UHF tag designed for use on metallic surfaces. It is manufactured with a special flexible shield so that it can be attached to flat or curved metal objects. The reading range is up to seven meters.
Asset Tag from Metalcraft
This tag is the closest thing to a “one size fits all” RFID solution! The Universal RFID Asset Tag is a surface independent tag that utilizes a patented inlay design and passive RFID technology to achieve read ranges regardless of the surface – metal, plastic and even wood. The inlay design has a very low profile for attachment to metal.
UHF Readers from FEIG
UHF Readers from FEIG
A total of 608 antennas and 120 readers with 50 multiplexers were installed.
Advantages
Even though the system has only been in use for a few weeks, the initial reports have been positive. Staff have rated the visualization of sites and movement analyses on desktops or mobile devices as making their work easier.
Less search time and walking are the result. Overall, the use of devices has been optimized, and with it the service for patients.
UHF Readers from FEIG
A total of 608 antennas and 120 readers with 50 multiplexers were installed.
Advantages
Even though the system has only been in use for a few weeks, the initial reports have been positive. Staff have rated the visualization of sites and movement analyses on desktops or mobile devices as making their work easier.
Less search time and walking are the result. Overall, the use of devices has been optimized, and with it the service for patients.
UHF Readers from FEIG
Routine Tasks Digitized and Data Management Optimized
Khaled Elshimy has been CEO of RFID Canada, based in Toronto, since 2022.
Interview with Khaled Elshimy
Where do you see the greatest advantages for the WPHC?
Khaled Elshimy: Hospitals are under great pressure to be efficient. The RTLS solution not only allows acute search queries to be answered quickly, but above all data analyses can also be carried out.
Needs analyses become more precise with analysis tools and AI. At the same time, investments can be optimized. Theft or other losses are also minimized.
Even bottlenecks can be predicted. The data thus helps the hospital to achieve end-to-end digitalization.
How do the staff evaluate the solution?
Overall, the efficiency of the processes benefits patients. The quality of care increases. Automating routine tasks makes everyday hospital life easier for everyone. The work and responsibility of nursing staff is made easier.
Interview with Khaled Elshimy
Where do you see the greatest advantages for the WPHC?
Khaled Elshimy: Hospitals are under great pressure to be efficient. The RTLS solution not only allows acute search queries to be answered quickly, but above all data analyses can also be carried out.
Needs analyses become more precise with analysis tools and AI. At the same time, investments can be optimized. Theft or other losses are also minimized.
Even bottlenecks can be predicted. The data thus helps the hospital to achieve end-to-end digitalization.
How do the staff evaluate the solution?
Overall, the efficiency of the processes benefits patients. The quality of care increases. Automating routine tasks makes everyday hospital life easier for everyone. The work and responsibility of nursing staff is made easier.
Khaled Elshimy has been CEO of RFID Canada, based in Toronto, since 2022.