Kerlink Adds LR-FHSS to LoRaWAN Gateways via Software Update
More network capacity, less radio interference: Kerlink is making LR-FHSS commercially available for existing Wirnet iBTS gateways—without the need to replace hardware.
More Capacity for Growing LoRaWAN Networks
Water, heat, and energy meters, environmental sensors, and industrial measuring devices regularly transmit data via LoRaWAN. As the number of connected devices increases, so does the load on the radio channels. Especially in large sensor networks, transmissions can interfere with one another and limit available network capacity.
French network equipment provider Kerlink is therefore expanding its Wirnet iBTS gateway family to include LR-FHSS (Long Range – Frequency Hopping Spread Spectrum). This wireless technology can be activated on compatible, already-installed gateways via a software update. According to the manufacturer, no hardware replacement or additional license fees are required.
The supported models are the Wirnet iBTS, iBTS Compact, and iBTS 64 Highway. Kerlink announced commercial availability on November 10, 2026.
What is LR-FHSS and how does it work?
LR-FHSS is a wireless protocol developed by Semtech that has been incorporated into the LoRaWAN standard as an additional transmission technology. It was developed specifically for large sensor networks in which numerous devices transmit small data packets.
While traditional LoRa transmissions take place within a fixed radio channel, LR-FHSS switches the transmission frequency multiple times during a message. The data is transmitted across a sequence of narrow frequency bands.
The advantage becomes apparent when multiple devices transmit simultaneously. If their signals overlap, the entire message is not necessarily affected. Thanks to the frequency hopping, built-in error correction, and packet headers transmitted multiple times, the receiver can reconstruct the data even in the event of partial interference.
As a result, LR-FHSS improves resistance to radio interference and enables more efficient use of the frequency spectrum. Especially in networks with many end devices, this can increase the number of successfully transmitted sensor messages.
The technology complements classic LoRa modulation and is particularly well-suited for small amounts of data that are regularly transmitted by numerous sensors.
How do municipal utilities and industry benefit?
One key application is smart metering. Thousands of water, heat, or gas meters can transmit consumption data via the same LoRaWAN network. If additional meters are integrated or readings are transmitted more frequently, the data volume increases.
LR-FHSS offers network operators the ability to better manage this growing load using existing infrastructure. Under suitable conditions, additional end devices can be connected without having to immediately set up new gateway locations.
The technology is also of interest for environmental monitoring, agriculture, and industrial condition monitoring. In these fields, large sensor networks are often operated, and the devices within them must communicate reliably over long periods of time.
The extent to which network capacity actually increases depends on the number of devices, their transmission behavior, and the radio conditions. Kerlink has not yet published specific performance data from commercial customer networks.
Classic LoRa and LR-FHSS Run in Parallel
The Wirnet iBTS gateways can simultaneously receive conventional LoRa messages and LR-FHSS uplinks and forward them to the LoRaWAN network server.
LR-FHSS is used for transmission from the end device to the gateway. Joining the network and communication back to the sensor continue to use classic LoRa modulation.
To use this feature, LR-FHSS-capable end devices and a compatible network server are required. Sensors that are already installed will not gain additional LR-FHSS support from the gateway update alone.
The technical foundation is Semtech’s V2 gateway architecture, which features dedicated resources for LR-FHSS signal processing. Kerlink integrated the reception functionality in collaboration with Semtech and tested it with its technology partner Indesmatech.
Upgrading Existing Wireless Networks for LR-FHSS
The LR-FHSS integration had already been tested in test and proof-of-concept environments. With this latest announcement, Kerlink is now making the feature commercially available for its Wirnet-iBTS series.
For operators of existing LoRaWAN networks, the retrofit capability is particularly appealing. Existing compatible gateways can continue to be used, while LR-FHSS-capable sensors gain additional transmission options. The network server can be used to control which devices communicate via classic LoRa or LR-FHSS in the future.
Further information: Kerlink – LR-FHSS for Wirnet-iBTS gateways